Mold structure of hole retaining ring

location:Home / NEWS / Mold structure of hole retaining ring

Mold structure of hole retaining ring

date:[2015-04-26]     pk_hits:
孔用擋圈模采用級進模制造來克服復雜的制造,實行多工位集中的工藝方案。在壓力機的滑塊上將上模凸模的活動部分緊緊的固定住。跟隨滑塊上、下往復運動。在壓力機的工作臺或墊板上,將下模凸模的固定部分緊固住。再用側刃初定位、彈性卸料、導正銷精定位、自然漏料等方式級進沖裁結構形式。
擋圈
在運作時,坯料在下模面上利用定位零件定位,壓力機滑塊帶動上模下壓,從而是的零件達到所需的形狀和尺寸。上?;厣龝r(shí),出件的裝置將零件從凹凸模送出,為下一次沖壓提供方便。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts